The 90-degree angle planetary reducer is a commonly used equipment. It is a high-torque device. It plays a very important role in industrial automation and other industries. After a long time of use, wear will occur. The 90-degree angle planetary reducer is in use. What problems should we pay attention to? Next, Shenzhen sz-windrive Automation will take you to understand.

     1. Light weight and high rigidity: The combination of the aluminum alloy profile base and the linear guide rail has completed two important features of the planetary reducer slide rail: light weight and high rigidity. The sliding table and the base are installed on the linear guide rail after passing through the male. The base cooperates with the sliding table to stabilize the bearing capacity of the module sliding table. The load displacement is small, and the bearing mass or load change can maintain high stability.

      2. Corrosion resistance: The right-angle reducer body and slider are all made of aluminum alloy which has passed the quality certification. The aluminum alloy surface is treated with anti-corrosion, passivation, and natural color anodizing, which has high corrosion resistance and wear resistance.

      3. Standardization of components: The components of the right-angle reducer are strictly required to be produced in accordance with the standards and production. In handling, transmission, transportation and other operations, the main components of the module with a horizontal, slow and straight management direction can be used.

Problems that should be paid attention to in the corner planetary reducer:

  1. Pay attention to the accuracy and durability of the planetary reducer: In the actual implementation process, the module slider maintains the basic ability of the original geometric accuracy, which has a lot to do with the stability and wear resistance of the guide rail size.

      2. Pay attention to the guiding accuracy of the planetary reducer: in every aspect, the main factor affecting the accuracy is the stiffness that the oil film adheres to.

   3. The rational selection of lubricating grease, especially the planetary reducer with input power exceeding 11KW, should be filled with load oil. Always check lubricating grease, hydraulic oil, coolant, oil quantity and quality, and check the sealing performance of the entire equipment. If it is found that there is too much oil, it should be analyzed in depth. At the same time, the lubrication of each lubricating point should be strengthened. It is recommended to add lubricating grease to the lubricating point every week during the running-in period (except for special requirements). When connecting the reducer with the hydraulic oil pump, pay attention to the rolling viewpoint of the hydraulic oil pump and calibrate it clockwise.

4. It is necessary to ensure the cleanliness of the planetary reducer and ensure that each component is in normal condition and does not loosen.

5. The operation cycle time of the planetary reducer has passed, and it should be overhauled, checked and adjusted regularly, and the oil should be replaced with care.

The above is the relevant knowledge about the 90-degree angle planetary reducer, I hope it can help you.